Electrical Matting
SM571_Class2_17K_1

Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT. Terms and conditions apply.

There is a 20% surcharge for all cut length products.

Fine Ribbed Grey Rubber Matting to IEC61111-2009 Class 2, 17,000V Working / 30,000V tested

Class 2
Working Voltage: 17,000V
Compliant to: IEC61111
  • REACH RoHS, PAH and CE Compliant
  • PAH compliant means low Odour, unlike cheaper grades
  • Fully tested to specification
  • Health & Safety regulation material
  • Anti-slip finish
  • Suitable Applications: Electrical Safety, General Purpose, Health & Safety
  • Grey – RAL 7001
  • Also available in bespoke cut parts
Product total
Options total
Grand total
EM571-2 Fine Ribbed Grey NR/SBR Rubber Matting to IEC61111-2009 Class 2 is a high-quality electrical safety matting fully tested to 30,000 volts with regulation standard stamped on the reverse of the roll at 1000mm intervals. Maximum safety working voltage of 17,000V. It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse. Class 2
  • Withstand Test: 30kv – No Electrical Puncture
  • Puncture Proof Test:  20KV for 3 Minutes
  • Working Voltage: – 17,000 volts
  • Thickness: 4mm
Key Points
  • Fully traceable supply
  • Regulatory branding on reverse
  • Low maintenance
  • Available 0.91m, 1.0m and 1.2m wide rolls
  • THIS GRADE DOES NOT CONTAIN RECYCLED RUBBER
Due to the very high quality of our raw materials, the need for additional thickness is not necessary. The IEC:61111 specification only states ‘maximum’ thickness, with minimum thickness being determined by suppliers’ ability to pass the correct tests defined in Clause 5 of the specification. The above materials do so with the ‘integral’ layflat quality of the rubber compounds, which is not impaired in any way. In addition to the above, our thinner grades present less of a trip hazard when laid, offering additional safety to operators. Standard finishes on this type are FINE RIBBED [corrugated] one side with an anti-creep impression on the reverse. MARKINGS
  • The example marking on the underside of the mat will consist of a tag denoting details as right
  • The brand shall be placed at 1000mm intervals along the length of the rolls
  • The brand shall be colour coded as per IEC:61111:2009 guidelines
  • Class ‘O’ – RED, Class ‘1’ – WHITE, Class ‘2’ – YELLOW, Class ‘3’ – GREEN, Class ‘4’ – ORANGE
  • Cut lengths available to order

Clause No.

Properties

Specification

–

Specific Gravity

1.50 ± 0.05

–

Hardness, Shore A

75 ± 5

–

Tensile Strength, Kg/cm2

50 Min.

–

Elongation at Break, %

200 Min.

–

Colour

Grey – RAL 7001

–

Surface Finish

Fine rib with fabric finish

ELECTRICAL PROPERTIES

5.5

MECHANICAL TESTS

5.5.2

Mechanical Puncture Test

Min 70N

5.5.3

Slip Resistance

Avg. force higher than 50N

5.6.2.2

Class

Proof Test

Withstand Test

5.6.2.3

Class – 0 (Thickness 2.0 mm)

20KV for 3 minutes

30KV – No electrical puncture

5.7

Ageing Test At 70 ± 2oC/168Hrs

 

Mechanical Puncture Test

Should be minimum 80% of original value

5.8

Thermal Properties

 

5.8.1

Flame Retardance

Flame should not propagate within a 50mm diameter from the centre

5.8.2

Low Temperature Resistance (4hr at -25 ± 3oC)

 

a) Visual Inspection

No cracks

 

b) Voltage withstand

No electrical puncture